Changing Channels; Adjusting The Volume; Displaying Status Information - Insignia NS-42PDP Guide De L'utilisateur

Insignia NS-42PDP 42" Plasma TV
Automatically setting up channels
To automatically set up the channel list:
1 Press the MENU button.
2 Press the or button one or more times
to highlight Setup, then press the OK or
button to open the Setup menu.
3 Press the or button one or more times
to highlight Auto Ch Search.
4 Press the OK or button to start the search.
Note
You can press the Exit button to stop the search.
Manually adding or deleting channels from the
channel list
After you create a channel list using the Auto Ch
Search option, you can manually add or delete
channels from the channel list.
To add or delete channels:
1 Press the MENU button.
2 Press the or button one or more times
to highlight Setup, then press the OK or
button to open the Setup menu.
3 Press the
to highlight Manual Ch Set.
4 Press the OK or
Manual Ch Set options.
5 Press the
then press the OK button to add or delete a
channel. If a channel is in the channel list, it
will have a mark beside it.
6 Press the EXIT button to close the menu.

Changing channels

To change channels:
• Press the CH
your TV or the CH – or + button on the
remote control to go to the next lower or
higher channel.
Or
Press the number buttons to select a
channel. For example, if you want channel
83, press 8, then press 3.
Or
Press the
channel.
Selecting a digital sub-channel
Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel might be 8-1, 8-2, and 8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel, for example 8.
2 Press the – button, the press the sub-channel
button, for example 1.

Adjusting the volume

To adjust the volume:
• Press VOL
TV or the VOL – or + button on the remote
control to decrease or increase the volume.
• Press the MUTE button to turn off the sound.
Press the MUTE button again to turn the
sound back on.

Displaying status information

To display status information:
• Press the INFO button. Your TV displays
status information, such as the channel
number or signal source.
www.insignia-products.com
or button one or more times
button to access the
or button to select a channel,
or button on the front of
button to go to the last viewed
or button on the front of your
15