Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Notes
•
When recording underwater, images and videos may appear less
clear than out of water.
•
You can record audio while the camera is under water, but the sound
level will be reduced.
Inspecting the O-ring
•
Carefully check for dirt, sand, hair, dust, salt, threads, etc. on the
O-ring. If anything is found, wipe it off with a soft cloth.
•
Do not leave any cloth fibers on the O-ring after wiping it.
•
Check the O-ring for cracks, skewing, distortion, fine splitting,
scratches, embedded sand, etc. Do not use the case if you find any
of these conditions.
Maintenance
•
Open the Floating Handle to let all the water
out after use. To open, turn and pull the cap on
the bottom of the handle.
•
Do not use any sharp or pointed objects to
prod any parts of the waterproof case, or
otherwise, the waterproof performance may
be compromised.
•
After recording in a location with a sea breeze, remove the case from
the camera. Wash the waterproof case thoroughly in fresh water
with the buckle fastened to remove salt and sand, then wipe with a
soft, dry cloth. Next, submerge the case in fresh water for about 30
minutes. If the salt is not removed, metal portions of the case may
rust and cause water leakage.
•
Wipe the inside of the waterproof case a soft dry cloth. Do not wash
it with water.
•
Do not use any type of solvent such as alcohol, benzene or thinner
for cleaning.
•
To prevent deterioration of the O-ring, store the waterproof case in a
cool, well-ventilated location. Do not fasten the buckle.
•
Prevent dust from collecting on the O-ring.
•
Avoid storing the waterproof case in extreme temperatures, in
high humidity, or together with naphthalene or camphor, as these
conditions might damage the case.
5202 CAN IM 修改中.indd 29
29
29
29
05/11/2019 14:42:07
Publicité
Table des Matières
