GE PTAN9150MWW Manuel De L'utilisateur page 7

INSTALLING THE WASHER
10. Turn on the power at a circuit breaker/fuse box.
11. Read the rest of this Owner's Manual. It contains
valuable and helpful information that will save you
time and money.
12. Before starting the washer, check to make sure:
Main power is turned on.
The washer is plugged in.
The water faucets are turned on.
The unit is level and firmly supported on its
4 leveling legs.
The drain hose is properly tied up.
There are no leaks at the faucet, drain line or
washer.
13. Run the washer through a complete cycle. Check
for water leaks and proper operation.
14. Verify the lid lock engages during the spin cycle.
The lock will be released shortly after basket stops.
15. If your washer does not operate, please review the
Before You Call For Service section before calling for
service.
16. Place these instructions in a location near the
washer for future reference.
(cont)
www.geappliances.ca
7