Klarstein 10033188 Mode D'emploi page 51

• For installation the appliance must be connected in accordance with all local gas
and/or electrical regulations.
• Carry the appliance with at least two persons. Use the slots or wire handles located
at both sides to move the appliance.
Connection to the mains supply
• This appliance must be earthed!
• No liability is assumed for any damage caused by using the appliance without an
earthed socket.
• The mains lead must not be clamped, bent or trapped or come into contact with
hot parts of the appliance. If the mains lead is damaged, it must be replaced by a
qualifi ed electrician.
• The mains supply must correspond to be data specifi ed on the rating plate of the
appliance. The appliance mains cable must correspond to the specifi cations and the
power consumption.
WARNING
Risk of electric shock! Risk of electric shock, short circuit or fi re due to
damage to the mains cable or improper installation. The appliance
may only be connected to the mains by an authorized qualifi ed person
and must be installed properly. Before carrying out any work on the
electrical installation, the appliance must be disconnected from the
mains.
Installation
1. Slide the oven into the cabinet aperture, align and secure it.
2. Fix your oven with the 2 screws and washers as indicated in the fi gure.
3. Connect the appliance to the mains supply and switch on the mains supply. Check
whether the appliance is working.
EN
51