Radio Operation - auna Roadie Sing Mode D'emploi

EN
28
B. AC OPERATION
Plug the detachable AC cord A into a standard AC outlet (230V~50Hz).
1. When the AC power cord (included) is connected to the AC Power Socket
on the back of the unit and the other end is plugged into a 230V AC~
50Hz wall outlet, the unit will disconnect the batteries automatically, and
operate on AC Power only.
2. Slide the FUNCTION SWITCH to "CD/USB" for CD or USB play, "FM" for
FM radio, "BT/AUX" for BT or AUX play and "OFF" for unit power off.
IMPORTANT
To use the power-management function (European models only).
This unit is equipped with an automatic standby function. With this function,
the unit enters standby mode automatically after about 15 minutes if there is
no operation or audio signal output.

RADIO OPERATION

1. Slide the FUNCTION SWITCH to "FM ST." as desired.
2. Rotate the TUNING CONTROL KNOB to your desired radio station
according to the DIAL SCALE on the knob.
3. Rotate the VOLUME CONTROL KNOB to adjust to the desired output
level.
4. To turn off the radio, slide the FUNCTION SWITCH to "OFF" position.
TIPS FOR BEST RECEPTION
FM – If a stereo broadcast program is being received, during FM or
FM Stereo reception, always keep the FM TELESCOPIC ANTENNA fully
extended for best performance. However, if FM reception is weak, try
repositioning the unit near an open window until you get the best reception.