Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note
• You can obtain additional cameras from Beurer Customer Services under item no.
163.569.
Delete camera
If you wish to delete the connection to a camera, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confi rm using the ( OK )button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
that you wish to delete.
• Confi rm using the ( OK ) button.
View camera
If you wish to select the transmission image from a camera, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confi rm using the ( OK )button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
that you wish to view.
• Confi rm using the ( OK )button.
Alternating camera image
If you have multiple cameras registered, the "Alternating camera image" function is
available. When this function is activated, the transmission images from the registered
cameras appear on the screen in the form of a loop that changes every 12 seconds.
To activate this function, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confi rm using the ( OK )button.
Energy-saving mode
The parent unit has a energy-saving mode. When you activate the energy-saving
mode, the screen switches off automatically after 5, 15 or 60 minutes, as you choose.
• Use the left/right direction arrows (
• Use the up/down direction arrows (
the screen should switch off automatically (5 mins, 15 mins or 60 mins).
• Confi rm using the ( OK ) button.
/
) to select the menu item
/
) to select the menu item
/
) to select the number of the camera
/
) to select the menu item
/
) to select the menu item
/
) to select the number of the camera
/
) to select the menu item
/
) to select the menu item
/
) to select the menu item
/
) to select the time period after which
23
.
.
.
.
.
.
.
Publicité
Chapitres
Table des Matières
