Vortice HR 40 Mode D'emploi page 30

ENGLISH
Time/day setting (fig.23a):
23a 23a
14:38
• press SET to display the parameter
• press ENTER to confirm the selection
• set the value of the flashing field with the + and - keys;
to confirm and move to the next field, press ENTER:
the sequence is HOURS, MINUTES, DAY; use the
NEXT button to change from one operation to another
without changing settings;
• after you have changed the DAY setting and pressed
ENTER for 4 seconds, the display will automatically
return to the main screen. Alternatively before the 4
seconds are up, you can press NEXT button and the
screen will go to the TEMPERATURE section.
Temperature setting (fig.23b):
23b 23b
T(°C)
• press SET, NEXT (3 times, starting from the main
menu) to display the parameter;
• set the value of the flashing field with the "+" and "-"
keys (from 15° C to 30° C, step 1° C); to confirm the
setting, press ENTER; after 4 seconds the display will
return to the main screen.
Relative humidity setting (fig.23c):
23c 23c
30
MAN
Fr
21
RH(%)
65
• press SET, NEXT (4 times, starting from the main
menu) to display the parameter;
• set the value of the flashing field with the "+" and "-"
keys (from 40% to 90%, step 5%); to confirm the
setting, press ENTER; after 4 seconds the display will
return to the main screen.
- + Button (fig.24)
24 24
14:38
DISPLAY
SET
Desired Speed setting (fig.24a) (Min,Med,Max)
24a 24a
14:38
To select the desired speed in MAN mode (V min , V med
MAN
Fr
TIMER MODE
NEXT ENTER
MAN
Fr