Vortice HR 40 Mode D'emploi page 24

ENGLISH
4 4
During the course
condensation collects on the bottom of the apparatus.
In order to draw it away the small piping provided must
be fixed to the attachment on the underside of the
appliance (fig.5), and connected to a drainpipe. (for
instructions please see the Assembly paragraph).
5 5
The appliance must be easily accessible in case of
servicing/maintenance. In particular a free space of at
least 50 cm must be left in front of the front panel, to
facilitate cleaning and replacement of the heat
exchanger and filters.
Checks on delivery
Check the appliance on delivery, to detect any faults
before proceeding
specifically:
firstly proceed with extracting it from the packaging,
ensuring that the name and description shown on the
box correspond:
once the appliance has been removed from the
packaging, verify that no visible damage is present, then
ensure that the small drain pipe for the condensation is
24
of its normal functioning,
with the installation.
present together with the instruction manual.
Assembly
The appliance comes equipped with two metal brackets
for vertical wall mounting and 4 supports for horizontal
positioning. The equipment required for the fastening of
the brackets is however not provided.
Establish the exact position where the apparatus is to
be located,
requirements.
Vertical mounting on brackets
Fix the brackets to the wall, using appropriate wall
anchors (fig.6,7,8).
6 6
7 7
More
bearing in mind the installation