Connect the pump hose and the pump cable to the system as follows:
Secure the hose from the feed pump (from pump set Art.no.: 612002) to the hose nozzle on the blue screw-type cou-
pling using the hose clamp provided (the hose can be shortened if needed), then bolt firmly onto the filling pipe screw
neck on the rear side (the threaded joint is self-sealing).
Electrical connection of the feed pump (only by a qualified electrician).
Shorten the pump cable to the required length and fit the supplied plug in line with the wiring diagram. The plug can
then be inserted into the flange socket on the rear of the system's cover and fixed in place with the cap nut.
The hose and cable routes are shown in the dimensions and installation diagram.
3. Dimensions and installation diagram
Translation of the original instruction
44