Default - Factory Settings - Macurco OX-12 Instructions D'utilisation

Default Configuration – Factory Settings

The default Power Up Test setting is ON

The default Display setting is ON

The default Buzzer setting is ON

The default Alarm Relay Setting is activation at 19.5% v/v

The default Alarm Relay Configuration is Normally Open

The default Fan Relay Setting is activation at 20.2% v/v

The default Fan Relay Delay setting is 3 minutes

The default Fan Relay Minimum Runtime setting is 0 minutes

The default Fan Relay Latching condition is OFF

The default Trouble Fan Setting condition is OFF

The default 4-20mA Output setting is ON
To change settings, remove the Philips screw on the front of the OX-12. Pull off the front cover of the unit.
13