Table des Matières
Publicité
ENGLISH
GENERAL INFORMATION
1.
Proper installation of this dock shelter is an essential condi-
tion for ensuring the high user safety properties of the prod-
uct. The recommended execution order and description of
a unit process for the dock shelter installation are given in
the instruction manual. All the existing rules and regulations
that apply to the installation of the dock shelter should be
Ru
strictly observed.
The contents of this instruction manual cannot be used as
the the basis for legal claims. The ALUTECH Group of Compa-
nies reserves the right to make changes and additions in the
En
construction of the dock shelter and this instruction manual.
SAFETY
2.
De
Only qualified personnel should carry out installation of the
dock shelter. They should know the construction and instal-
lation process of the dock shelter, and undergo training to be
instructed on the safety system. When performing installation
work it must strictly comply with the applicable national rules
Fr
and regulations concerning the safety of operations.
Y
Changes in the construction of the dock shelter are not
allowed.
Ua
•
Do not remove or change details, components, functional
parts. Use only the manufacturer's original elements.
•
Do not place any extraneous items on the dock shelter.
Additional elements may cause improper operation of the
product and may lead to its malfunction.
Y
Use only original manufacturer`s fasteners.
Y
For the implementation of technically correct and safe
installation, it is necessary to carefully perform all the
operations in the order indicated in the illustrations.
2
2
We are obliged to you for purchasing our product
and we hope that its quality will confirm that you made the right choice.
DEAR CUSTOMER!
REQUIREMENTS FOR FASTENERS
3.
When mounting the dock shelter, you may use different
mounting hardware. The choice depends on the material of
the façade or part of the structure, which the dock shelter will
be mounted to. The hardware is not included in a standard kit,
available as an option.
Suggestions on how to choose necessary hardware:
•
for fastening to a façade made of a sandwich panel,
cellular concrete, hollow brick and other similar materials,
use a threaded rod with a metric thread M8;
•
for fastening to a façade made of concrete, solid brick,
lightweight aggregate concrete, natural stone and other
similar materials, use 50–80 mm long Ø10 plastic nylon
dowels fitted with Ø8 screws;
•
for fastening to the metal facade (metal framing or metal
framing + profiled sheet), use a self-tapping screw with
a metric thread M8.
All the hardware should be resistant to corrosion.
Y
Note that to ensure reliable clamping of the dock shelter
frame to the building structures, plain steel washers
should be installed under the heads of screws, bolts and
nuts.
DELIVERY OF INSTALLED PRODUCTS
4.
The handover of installed products to the Customer must be
performed by a representative of the Organization who car-
ried out the installation of the product, in the following order:
•
making an operational demonstration;
•
holding a briefing on use;
•
completing (filling-in) the product passport.
Publicité
Table des Matières
