Hendi 2000 Mode D'emploi page 9

• If you do not use the appliance for an extended period, remove the plug from the wall-mounted electrical
socket and remove the pans from the appliance.
NOTE! Allow the appliance to cool off before you touch it. The glass plate is very hot after use.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
Do not use petrol or solvents! Clean with a damp
Trouble shooting
Error message Cause
E01
Internal temperature of the appliance is too
high or the fan inside is not working.
E02
The temperature of the pan is too high. If the
pan is dry or empty it can reach a very high
temperature. The appliance will shut down to
protect the internal parts.
E03
Input voltage is too high or too low.
Technical specification
Item no.: 239230
Operating voltage and frequency: 230-240 V ~ 50Hz
Remark: Technical specification is subjected to change without prior notification
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
At the end of the life of the appliance, please dis-
pose of the appliance according to the regulations
and guidelines applicable at the time.
cloth and detergent if necessary. Do not use
abrasive materials.
• Clean the fan openings with the vacuum cleaner.
• Clean the glass plate each time after use. This
is to prevent any residues from burning onto the
glass plate.
• For daily cleaning of the glass, special detergent
should be used
Solution
Make sure there is a minimum distance of
10cm between the ventilation slot and any ob-
struction such as a wall or other appliances.
Unplug, let the appliance cool down, plug back
in and switch ON the appliance.
Check and clean the air inlet and outlet if they
are blocked.
Remove the cookware from the appliance. Let
the appliance cool off.
Make sure the appliance is connected to the
correct input voltage.
Rated input power: 2000W
Dimension: 296x370x(H)46mm
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
EN
9