Morphy Richards Redefine Mode D'emploi page 8

BRITA filtration
Filtering your water improves the taste and
appearance of beverages by reducing limescale, lead,
chlorine and other impurities.
The BRITA MAXTRA Filter Cartridge offers improved filtration
due to MAXTRA Technology. The natural
MicroporeFilter in combination with the powerful Protect
Filter reduces chlorine and limescale for a great natural taste
and further reduces metals such as lead and copper. Unique
flow control ensures the perfect
filtration time for best results.
For maximum filter performance and for optimum taste, it is
important to change your BRITA MAXTRA Filter Cartridge
regularly. BRITA recommends that you replace the cartridge
every 4 weeks.
Using the BRITA filtration system is optional. If you do not
wish to use the filtration system, simply remove the BRITA
Hopper (21) and MAXTRA Filter Cartridge (19) from the Water
Tank (7).
Filtering water through the BRITA Filtration System takes
roughly 4 minutes to filter 1.5L of water.You can use the
system while filtering, providing enough water has filtered
into the Water Tank.
Installing a BRITA MAXTRA
Cartrige
1
1 Unwrap the BRITA MAXTRA Cartridge (19) and immerse
in water, gently shake to loosen any bubbles.
2 Push the BRITA MAXTRA Cartridge into place in the
BRITA Hopper.
3 Place the BRITA Hopper into the Water Tank.
Before returning the Water Tank to the Main Unit, fill the
BRITA Hopper with Cold Water and allow the
water to filter through the BRITA MAXTRA Cartridge.
Discard the filtered water. Repeat this step twice.
4 Fill the Brita Hopper with fresh water and return the
Water Tank to the main unit.Your BRITA Cartridge is
ready for use with your Hot Water Dispenser.
8
BRITA Memo
The BRITA Memo (20) measures the recommended time of
use of your MAXTRA Filter Cartridge (19). The BRITA Memo
is located in the top of the BRITA Hopper (21).
To reset the BRITA Memo, please press and hold down the
Start Button on the Memo until all four bars appear in the
display and flash twice. The Cartridge Active Indicator Light
in the bottom right corner of the BRITA Memo indicates that
it is working. After four weeks, all four bars will disappear
and a flashing arrow will indicate that the cartridge should
now be changed. After changing the cartridge, reset the
Memo.
Replacing the BRITA Memo
The BRITA Memo (20) has a life of approximately 5 years. To
remove the exhausted BRITA Memo, place a screwdriver in
the notch next to the BRITA Memo and push it out. Please
note that BRITA Memo should not be removed for any other
reason than to dispose of it.
More information on the use of BRITA filter cartridges and
the BRITA Memo can be found in the BRITA information
guide supplied with your hot water dispenser.
Telephone our replacement parts helpline (0844 873 0726)
for your new BRITA Memo. If you require assistance on using
your BRITA MAXTRA filter cartridge or BRITA Memo, please
call BRITA Customer Care team on 0844 742 4800.
2