Technical Data; Installation - Bego Otoflash Traduction De La Notice Originale

Technical data

Nominal voltage. ...........................................................................................................100,115, 230 Volt AC
Nominal frequency ........................................................................................................................... 50/60 Hz
Power consumption ................................................................................................................ approx. 250 W
Dissipated power .................................................................................................................... approx. 200 W
Image frequency ......................................................................................................... 10 flashes per second
Lifetime of the flash tubes ................................................................................... average approx. 250 hours
Digital timer .............................................................................................. adjustable from 1 to 9999 flashes
Size of the polymerization chamber....................................................................approx. 120 x 120 x 50 mm
Spectral distribution.................................................................................................................. 300 - 700 nm,
.............................................................................................................. Maximum between 400 and 500 nm
Dimensions .......................................................................................................approx. 310 x 310 x 140 mm
Weight .........................................................................................................................................approx. 6 kg
Option protective gas ................................................................................minimum nitrogen N2, 2.6 N2, 2.6
.............................................................................................................................. Gas pressure: 1.0-1.2 bar
..............................................................................................................................Gas flow: approx. 10 l/min

Installation

NOTE
Ensure ample space to the wall so that the lid can
be opened without being obstructed and that
there is sufficient space for ventilation.
Electricity
DANGER
Danger due to electric shock
Check if the specifications on the type
plate correspond to the power supply
network before connecting the device.
Consult an electrician in case of
uncertainty.
The device is subject to protection
class I and must only be connected to
properly grounded power sources.
English ⋅ Otoflash
en
23