Inserting The Rechargeable Battery Pack - SEVERIN RB 7028 Mode D'emploi

4 Preparing the robot

4.3 Inserting the rechargeable battery pack

7
8
9
56
1. Make sure that the appliance is switched off and the
mains adapter is not connected.
2. Carefully place the appliance on its head so that the un-
derside is accessible.
3. Press the catch to unfasten it and remove the recharge-
able battery compartment cover (fig. 7).
4. Push the rechargeable battery pack against the springs
(fig. 8).
Make sure that the "+" marking on the rechargeable bat-
tery is positioned opposite the "+" marking in the re-
chargeable battery compartment.
5. Push the rechargeable battery pack down into the re-
chargeable battery compartment.
6. Firmly push the rechargeable battery cover on so that
you hear and feel it click into place (fig. 9).
The rechargeable battery is now installed and has to be
charged, chapter „Charging the robot", page 57.