Error Messages - Parker Serviceman Plus Mode D'emploi

5.

Error messages

Display Description
ERROR 1 Internal device error
ERROR 2 Memory error
USB ERROR Error when saving to the USB flash drive
USB FULL ERROR The USB flash drive is full
FIRMWARE The firmware update has failed. This occurs when
ERROR the transfer of a new firmware from the USB flash
drive failed.
CAN ERROR CAN initialization failed. Unknown CAN sensor, or
more than three CAN sensors connected
V1.0/02/12
Solution
Confirm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
Confirm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
USB flash drive is full, defective or not compatible.
Please use only USB flash drives that conform to the
Technical Specifications (see page 23).
Delete files on the USB flash drive or use a new one
Confirm by clicking <OK>. If this occurs frequently,
please return the unit for repair.
Please make sure you are only using Parker CAN
sensors and connecting no more than three sensors.
error messages
19