Niko 05-715 Mode D'emploi page 58

05-715
In programming mode, the input LEDs can have the following
meaning:
LEDs
Upper LED blinks, the other
LEDs are out.
Middle LED blinks, the other
LEDs are out.
Lower LED blinks, the other
LEDs are out.
All LEDs blink.
Exit the dimmer's programming mode to save the selected operating
mode: press the select button >3s:
- the input LEDs no longer blink, only the input LED of the selecte
doperating mode blinks continuously (if the 2-button mode was
selected, all input LEDs are out).
Note: if not action is carried out in programming mode for 3min,
the programming mode is automatically exited. The settings
are not saved.
58
Meaning
Selection of 0-10V control
(mode 1)
Selection of 1-10V control
(mode 2)
Selection of 1-button mode
(mode 3)
Selection of 2-button mode
(mode 4)
EN