Worx LANDROID Guide D'installation page 18

• If your Landroid
outside its territory,
it will not move and
Warning
the LED error light
will be in red and
flashing, and the
machine will beep.
Just move it inside
its territory and
repeat Step 4.
NOTE: Please refer to the Owner's Manual for more information.
Ready to go?
The Landroid is designed for maintaining your grass at a perfect length during the season, but is not designed for deforesting a jungle.
®
Before it starts mowing for the first time,
1. You should mow your lawn to the desired height.
2. Make sure the operating area is clear from objects such as toys and branches...
18
EN
Next spring, let your Landroid
is • Landroid turns
® ®
on, but the blade
disc does not
move. This is
normal, Landroid
®
needs to recharge,
the blade disc does
not rotate while
it is searching for
the Charging Base
automatically.
start mowing early, when the grass is still short, so that you can avoid a preliminary grass cut.
®
• Your Landroid
• If your Landroid
®
should always
is inside its territory
remain switched
but the LED error
on. If you ever
light is on and in
red, please refer to need to turn it
"Error Messages" off, then make
in Owner's Manual sure you place it
for solutions. within its boundary
area before you
switching it back
on again.
• Should your
®
Landroid stop
®
operating, simply
restart it and
operate it as you
normally would.