Worx LANDROID Guide D'installation page 12

2. Pegging Your Boundary Wire
When pegging the boundary wire for the first time, it is recommended to use a normal lawn mower or a grass
trimmer to cut the grass along the boundary. Then the wire can be laid as close as possible to the ground to prevent
the Landroid accidentally cutting the wire. The boundary wire is powered with a very low voltage so that it is totally
®
safe to human beings and pets.
12
EN
80cm
75cm
NOTE: Keep the boundary wire straight and tight between the
pegs, there should be no slack wire between the pegs.
2.1
When laying the boundary
wire, use the distance
gauge to keep a 26cm space
between the wire and the
boundary.
Each wire peg should be
placed around 75cm apart.
Use the provided distance
gauge to ensure proper
installation.
NOTE: The maximum
permitted length for the
boundary wire is 350m.