Worx LANDROID Guide D'installation page 16

3. Connecting Your Charging Base to
the Power Source
16
EN
a
2.9
Securing your charging base
You can now permanently fix the charging base on the
ground by tightening the supplied Base Fixing Nails with the
supplied Hex key.
3.1
When connecting the power cord of the charging base to the
adaptor, align the notch on the power cord connector (b) with the
b
groove on the adaptor connector (a).
In case the power cord is within the working area, you may bury it
as needed.
NOTE:
Select a dry and sheltered place to keep the adaptor. It is
recommended to hang the adapter on a vertical surface, such as
a wall.
3.2
Then connect the adaptor to the electrical outlet, the LED on the
charging base will turn on. Check the LED status to make sure
the connection is OK.