Switching Off - Hendi 224328 Mode D'emploi

It is forbidden to introduce the machine in the pot,
more than the immersion nick and however over
the tool blocking nut.
It is recommended to make not work the machine
on vacuum.
We recommend to control periodically the tire gas-

SWITCHING OFF

In succession, the switching off must follow what
here under indicated:
• Before the switching off wait the working conc-
lusion, or wait that the feed product has reached
the desired solidity,
• Stop the machine releasing the foreseen control
ket integrity placed under the blade (see drawing)
and change it if it is damaged or worn.
The gasket integrity prevents the working product
seepage inside the tool avoiding damages to the
mixer.
devices,
• Place the machine on a support adequate bench
• Disconnect the plug from the machine from the
feeding socket,
• Perform the cleaning interventions.
EN
13