System Setup; Mono System - Monitor Audio CLIMATE GARDEN Série Guide D'installation

Masquer les pouces Voir aussi pour CLIMATE GARDEN Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Once the mount is fixed to the intended
3
location, thread through the speaker cable
and attach the CLG140/ CLG160 (i). Secure in place
with the two grub screws (ii).
ii
i
HINT: To assist in
threading the speaker
cable
through
the
mount we would advise
having the ball fixing
arm angled upwards.

System Setup

To power the system we would recommend using the Crown CDi 2000 amplifier. For optimum performance from the system
download the Monitor Audio Crown CDi 2000 preset DSP settings from our website: www.monitoraudio.com
These preset DSP settings have been designed by Monitor Audio to bring the best performance from your satellite speakers
and sub, with a crossover in place to direct only the low frequencies to the subwoofer and mid-highs to the satellites. This will
allow each component to focus on what is does best, adding clarity to the system and also protecting the satellite speakers
from potentially harmful/ overbearing sub frequencies.

Mono System

With Monitor Audio's preset DSP settings installed (refer to page 6 and 7) and the 'CLG DUAL' preset selected on the amplifier
the Crown CDi 2000 will send mid-high frequencies to channel 2 and bass frequencies to channel 1. Connect the sub to channel
1 and the satellites in parallel to channel 2 (expandable to a maximum of 30 speakers).
Note: Due to the nature of garden listening Monitor Audio would recommend a Mono system for the majority of
installations.
4
Connect speaker's cables in parallel with
the main run of cable from the amplifier
combining all positive cable together and all
negative cables together.
To CLG140/
CLG160
From previous
speaker/ amp
opposite) or appropriate weather proof junction box
(not included).
Note: Ensure that no '-' and '+' strands are
touching each other as this will cause a short
circuit that could damage your amplifer.
Amp
Channel 2
monitoraudio.com
Connections
should be made
with either
silicone filled
wire connectors
To Next speaker
(example
CLG DUAL
Channel 1
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Clg-w12Clg-140Clg-160

Table des Matières