Hilti PS 200 Mode D'emploi page 58

en
Use Select All or Select to select scans for moving or
deletion.
Select All selects all the scans in the project.
Select selects the scan currently highlighted and may
also be used to select multiple scans.
Move... moves the selected scans to another project of
your choice.
Delete deletes the selected scans.
-NOTE-
Move and Delete are unavailable until one or more scans
have been selected.
Date/Time and Serial Number allow the date and time
of the scans in the project, or the serial number of the
scanner used to make the scans, to be shown.
56
Printed: 07.07.2013 | Doc-Nr: PUB / 5070389 / 000 / 00
All manuals and user guides at all-guides.com
7.3.4.1.1 Moving scanned images
After selecting one or more scans, select Move...
Select the project to which you wish to move the scans
using the left and right arrow buttons. The source and
target projects are shown at the top of the main display
area.
Move moves the scans to the selected project and returns
to the View Scans menu.
Done returns to the View Scans menu without moving
the selected scans.
7.3.4.1.2 Deleting scanned images
After selecting one or more scans, press Delete.
Press OK to confirm.
-WARNING-
This operation will result in permanent deletion of data.
Ensure that the data is no longer needed or has been
transferred to the PC before deleting.