Control Panel - Masterbuilt MES 130P Mode D'emploi

Operating Instructions

CONTROL PANEL

To set temperature for smoking:
• Press ON/OFF button
• Press the SET TEMP button once. LED will display boTM (bottom element).
• Press the SET TEMP button again to select the bottom element.
• Press the UP or DOWN arrows
(135°C).
• Press the SET TEMP button again to lock in the temperature.
• The bottom element icon
To set timer:
• Countdown Timer:
• Press the SET TIME button
• Use the UP or DOWN arrows
• Press the SET TIME button
• Use the UP or DOWN arrows
• Press the SET TIME button
• Duration (Count-up) Timer:
• This timer will start counting from 00:00.
• Press and hold the SET TIME button
NOTE: When outside temperature is cooler than 65°F (18°C) and/or altitude is above 3,500 feet (1067m),
additional cooking time may be required. To ensure that meat is completely cooked use a meat
thermometer to test internal temperature or use meat probe, if featured.
Grill + Finish Element:
• The Grill + Finish element provides two unique benefits:
1. Food can be slow-smoked and then positioned under the top broiler element to crisp or carmelize a
sauce.
2. Food can be cooked under the Grill + Finish element quicker than traditional smoking, similar to a
broiler in an oven.
Setting the Grill + Finish element:
• Press the SET TEMP button once. LED will display boTM (bottom element).
• Press the UP or DOWN arrows
• Press the UP or DOWN arrows
• Press the SET TEMP button again to lock in the setting.
• The Grill + Finish element icon
NOTE: A time does not have to be set. The element will begin heating once the temperature is set.
20
. LED will display temperature/meat probe/time in sequence.
to select temperature. The maximum temperature setting is 275°F
will illuminate to indicate temperature has been set.
once-LED display for hours will blink.
to set hours.
again to lock in hours. The minutes LED will start blinking.
to set minutes.
to lock in minutes and start the timer.
once - LED display will start counting from 00:00.
to select ToP (Grill + Finish element) and press SET TEMP again.
to select High/Medium/Low.
will illuminate to indicate temperature has been set.