Preset Temperature - Mitsubishi Electric PAC-YT53CRAU Manuel D'instructions

Preset temperature

In COOL, DRYING, HEAT, and AUTO (single set point) modes
Pressing the
TEMP.
Pressing the
TEMP.
In AUTO (dual set point) and SETBACK modes
Cooling preset temperature
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Heating preset temperature
Current operation mode
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Set to
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
* During the preset temperature setting, the setting will automatically turn off if the
button is left untouched for a certain period of time.
TEMP.
button increases the preset temperature.
button decreases the preset temperature.
Current preset temperature (cooling/heating) appears.
* The example shows the display in AUTO (dual set point) mode.
When the TEMP. or
(cooling/heating) display blinks.
While the preset temperature (cooling/heating) display blinks, pressing the
TEMP. button increases the preset temperatures for both cooling and heating,
and pressing the
TEMP.
cooling and heating.
When the button is pressed, only the cooling preset temperature display
MODE
blinks.
While the cooling preset temperature display blinks, pressing the
increases the cooling preset temperature, and pressing the
decreases the cooling preset temperature.
When the button is pressed, only the heating preset temperature display
MODE
blinks.
While the heating preset temperature display blinks, pressing the
button increases the heating preset temperature, and pressing the
button decreases the heating preset temperature.
Pressing the
MODE
– 7 –
button is pressed, the preset temperature
TEMP.
button decreases the preset temperatures for both
button completes the preset temperature setting.
ON
TEMP.
button
button
TEMP.
TEMP.
TEMP.
or
TEMP.