Display - Mitsubishi Electric PAC-YT53CRAU Manuel D'instructions

Display

CENTRAL icon *1
CHECK icon *2
Indoor temperature
Operation modes
*1 icon
CENTRAL
Appears when one of the following local operations is prohibited: ON/OFF; operation mode; preset temperature;
fan speed; vane.
*2 icon
For M-Series and P-Series, when an error occurs, power indicator will blink, and refrigerant address (two digits),
error code (two digits), and unit No. will blink.
For City Multi, when an error occurs, power indicator will blink, and unit address (three digits) and error code (four
digits) will blink.
Check the error status, stop the operation, and consult your dealer.
[M-Series and P-Series]
Room
Refrigerant
address and unit
attribute appear
alternately.
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
When only error code blinks, air conditioning units stay in operation, but an error may have occurred.
Check the error code, and consult your dealer.
[M-Series and P-Series]
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
*3 Preset temperature
* Centigrade or Fahrenheit is selectable. Refer to the Installation Manual for details.
In COOL, DRYING, HEAT, or
AUTO (single set point) modes
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Preset temperature *3
Set to
Error code and
unit No. appear
alternately.
Set to
Error code
blinks.
Set to
Preset
temperature
* All icons are displayed for explanation.
icon appears while the unit is operated in the
energy-save mode
icon appears when Operation lock setting is
effective. (See page 10.)
icon appears when indoor unit functions are set up.
(Refer to the Installation Manual.)
Fan speed icon
Vane icon
icon appears when the power is on.
Room
Unit address
blinks.
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
In AUTO (dual set point) or
SETBACK modes
Room
AUTO COOLHEATFAN
DRYING VENTI. SETBACK
– 5 –
[City Multi]
Set to
Error code
blinks.
[City Multi]
Set to
Error code
blinks.
Cooling preset
temperature
Set to
Heating preset
temperature