Acoustic Signals - ARTHUR MARTIN ASL5346LA Mode D'emploi

1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press .
• The indicators
off.
• The indicator
• The display shows the current
setting: e.g.
3. Press again and again to change the
setting.
4. Press the on/off button to confirm the
setting.
The rinse aid empty notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the rinse
aid indicator is turned on notifying to refill
rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press .
and until
, and
and
continues to flash.
= level 5.
and until
, and
• The indicators
• The indicator
flash.
• The display shows the current
setting.
–
go
activated.
–
notification deactivated.
3. Press
4. Press the on/off button to confirm the
setting.

Acoustic signals

Acoustic signals sound when a malfunction
of the appliance occurs. It is not possible to
deactivate these acoustic signals.
There is also an acoustic signal that sounds
when the programme is completed. By
default this acoustic signal is deactivated
but it is possible to activate it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously
the indicators
start to flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting:
–
–
3. Press
4. Press the on/off button to confirm the
setting.
and
continues to
= rinse aid empty notification
= rinse aid empty
to change the setting.
and
, and
.
and
continues to
= Acoustic signal off.
= Acoustic signal on.
to change the setting.
9
go off.
until
go off.