CD-MP3 OPERATION
1.
Select "CD" mode by turning the [MODE] knob (1);
2.
Press [OPEN/CLOSE] (7) to open the [CD DOOR] (6) and place a CD with the label
up in the CD compartment.
3.
Close the [CD DOOR] (6). Focus search is performed and playback will start auto-
matically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1.
Stop the playback by pressing [STOP] (14);
2.
Press [PROGRAM] (9), the display (5) will show the number of the track on
the left side and the number of program on the right side.
3.
Select desired track by using [SKIP -/+] buttons (10/11);
4.
Press [PROGRAM] (9) to confirm desired track into the program memory;
5.
Repeat step 3 and 4 to enter additional tracks into the program memory.
6.
When all the desired tracks have been programmed, press [PLAY] (12) to play the
disc in the order you have programmed.
Note: Press [STOP] (14) twice to terminate programmed play.
BLUETOOTH OPERATION
1. Select "BT" mode by by turning the [MODE] knob (1);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "HRA-
1782ND+BT";
3. You can now transfer the music to the HRA-1782ND+BT.
Note: Music control (play, pause, etc) must be done from your external device.
AUX-IN OPERATION
1.
Use one male RCA to male 3.5mm jack cable (not included) to connect any exter-
nal audio device to the [AUX-IN SOCKET] (18);
2.
Select "AUX" mode by turning the [MODE] knob (1).
Note: Music control (play, pause, etc) must be done from your external device.
USB OPERATION
1.
Select "USB" mode by turning the [MODE] knob (1);
2.
Plug an USB stick into the [USB PORT] (3);
3.
Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
The USB port is not designed for charging smartphones or other devices.
English
4