Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
English
FACTORY RESET
1.
Press [MENU] (9) to access to the menu;
2.
Use the [SKIP -/+] button(10/11) to navigate into the options and select "System";
3.
Confirm with the [ENTER] button (14);
4.
Use the [SKIP -/+] buttons (10/11) to select "Factory Reset";
5.
Confirm with the [ENTER] button (14);
6.
Use the [SKIP -/+] buttons (10/11) to select "yes";
7.
Confirm with the [ENTER] button (14).
TO USE THE RADIO
1. Set the Mains [POWER SWITCH] (0) to ON;
2. Press the [POWER] button (1) to power ON;
3. (The first time you power on the radio, the radio will scan the DAB radio stations
automatically. It will display and play the first station after the scan is done);
4. Select the desired audio source by turning the [MODE] knob (1);
5. (Please see detailed instructions for each Source in the following chapters);
6. Adjust the volume with the [VOLUME KNOB] (2) to the desired level;
7. To power OFF the radio, press the [POWER] button (1).
DAB RADIO OPERATION
1.
Select "DAB" mode by turning the [MODE] knob (1);
2.
Use the [TUNE -/+] buttons (10/11) to select the desired radio station.
Note: In case there is No DAB Service, press the [SCAN] button (12) to start scan.
Note: For a better reception reorient the antenna (17).
FM RADIO OPERATION
1.
Select "FM" mode by turning the [MODE] knob (1);
2.
Press the [TUNE -/+] buttons (10/11) to manually select the frequence or press and
hold (2 seconds) to scan the next/previous available station.
Note: For a better reception reorient the antenna (17).
STORE RADIO STATIONS AUTOMATICALLY:
Press the [SCAN] button (12) and the radio will automatically scan the radio. During the
scanning process, the radio will save the scanned stations sequentially into the memory.
PRESET
There are 20 presets available for DAB and 20 presets for FM.
1.
Set the desired radio station frequency as explained previously;
2.
Press and hold the [PRESET] button (15);
3.
Choose the number of preset using the [TUNE -/+] buttons (10/11);
4.
Confirm with the [ENTER] button (14).
RECALL A PRESET STATION
1.
Press the [PRESET] button (15);
2.
Select the desired preset using the [TUNE -/+] buttons (10/11);
3.
Confirm with the [ENTER] button (14).
INFO
When the radio station is playing, press the [INFO] button (8) repeatedly to cycle through
the information broadcasted by the radio.
Publicité
Table des Matières
