Roadstar HRA-1782ND+BT Manuel D'instructions page 7

Masquer les pouces Voir aussi pour HRA-1782ND+BT:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
the electrostatic discharge. Switch off, disconnect AC cord then turn the power back on
after a few seconds.
POWER SOURCES
AC POWER: To power your radio, plug the AC power cord into into a wall AC power out-
let. Check that the rated voltage of your appliance matches your local voltage.
CLOCK AND DATE SETTING
When the radio is OFF:
1.
Press and hold [STOP] (14) to access to the menu;
2.
Press the [SKIP -/+] buttons (10/11) to select 12 or 24 h;
3.
Confirm with the [ENTER] button (14);
4.
Press the [SKIP -/+] buttons (10/11) to adjust the hour;
5.
Confirm with the [ENTER] button (14);
6.
Press the [SKIP -/+] buttons (10/11) to adjust the minutes;
7.
Confirm with the [ENTER] button (14);
8.
Repeat steps 4 and 5 to set the date.
SETTING TIMER
When the radio is OFF:
1. Press and hold [TIMER] button (22);
2. The hour digits will flash on the display. Press the [SKIP -/+] buttons (10/11) to adjust
the hour;
3. Confirm with the [TIMER] button (22);
4. Press the [SKIP -/+] buttons (10/11) to adjust the minutes;
5. Confirm with the [TIMER] button (22);
6. Press the [SKIP -/+] buttons (10/11) to choose the alarm mode: DAB/FM/CD/USB;
7. Confirm with the [TIMER] button (22);
8. Press the [SKIP -/+] buttons (10/11) to adjust the volume;
9. Confirm with the [TIMER] button (22);
10. Repeat steps 2 to 5 to set the "OFF TIME".
ACTIVATE / DEACTIVATE ALARM SETTINGS:
In standby, press repeatedly the [TIMER] button (22) to select "AlarmON" or "AlarmOFF".
SLEEP TIMER
The sleep timer switches the radio off automatically after an adjustable time.
When the radio is ON:
1.
Press and hold the [TIMER] button (22);
2.
Use the [SKIP -/+] buttons (10/11) to select the desired timer;
3.
Confirm with the [TIMER] button (22);
Note: To remove the sleep timer select "Sleep OFF".
NAVIGATE INTO THE MENU
1.
Press the [MENU] button (9) to access to the options;
2.
Use the [SKIP -/+] buttons (10/11) to navigate into the options;
3.
Press [ENTER] button (14) to select the options;
4.
Press [MENU] (9) to exit the menu.
English
2

Publicité

Table des Matières
loading

Table des Matières