Hama PROFESSIONAL M12CD Mode D'emploi page 13

Error
The cutting rollers do
not turn on brie y after
the power button (3) is
pressed
The overload warning
LED (13) lights up in red
The overheating war-
ning LED (14) lights up
in red
The Bin full LED (15)
lights up in red
1
Possible cause
The On/Off switch (3) on
the back is set to "0".
The connection cable
(2) is not connected
correctly.
No mains power
Device is faulty.
Too much paper has
been inserted or it has
been drawn in croo-
kedly.
The device is overhe-
ated
The bin (9) is full.
Solution
Switch the on/off switch
(8) to position 1.
Ensure that the mains
plug is plugged into the
socket.
Check your fuse box.
Inform our customer
service department.
Switch the device off
and let it cool off for at
least 30 minutes. Then
complete the steps un-
der 4.2.4. "Forward and
reverse modes"
Switch the device off
and let it cool off for at
least 30 minutes.
Empty the bin.
g
1