SOMFY 5125845A Notice D'installation page 9

Introduction
The TaHoma Serenity remote control is used to control the modes
of the TaHoma Serenity interface.
These functions can only be accessed if your TaHoma Box is
connected to the TaHoma Serenity base plate.
You can customise the zones you wish to protect in your TaHoma
Serenity interface. Once customisation is complete, one click on
the remote control allows you to activate or deactivate protection
for your predefined zones or your entire home.
Copyright © 2016 Somfy SAS. All rights reserved.
Function
Partial 1
SOS
Partial 2
OFF
Total home protection
9