PRASTEL EASYBKW Mode D'emploi page 17

EASYBKW
9. Changing the backlight and LED behavior
1) Enter Programming Mode
2) Press "6" to enter Menu 6,
the Transmit LED will turn
red.
3) Enter the appropriate option
number for the backlight
mode that you wish to select
(see the following table). If
an incorrect option number
is entered the reader will
return to Transmit Mode and
the keypad
format
unchanged.
4) System returns to Transmit Mode, you will hear one beep, the
Program LED will turn off the Transmit LED will turn red.
WARNING: In modes 2 and 3, backlight is actually turned off or
dimmed 10 seconds after programming.
Backlight and LED mode
LED active, backlight OFF
LED active, backlight ON (default)
LED and backlight OFF, both activated on any key
press for ten seconds.
LED active / backlight Dimmed, backlight
activated on any key press for ten seconds.
transmission
will remain
ENGLISH
17
ISEASYBKW_06_17
GREEN
6
RED GREEN
Option number
0
1
2
3
.docx