PRASTEL EASYBKW Mode D'emploi page 12

EASYBKW
6. PROGRAMMING THE EASYBKW
Programming the EASYBKW is done solely via the unit's keypad
driven Programming Menu System (see par. 6.1).
During the EASYBKW's manufacturing process certain codes and
settings are pre-programmed. These settings are the called the
"Default Factory Settings".
The table below shows the names of all the EASYBKW Menus.
Selecting keypad transmission format
Changing the programming code
Changing the facility code
Changing the backlight and LED behavior
Return to Factory Default Settings
6.1 Entering Programming Mode
1) Press the "#" key 4 times. Transmit LED will turn off and
Program LED will turn red.
2) Enter
Programming Code.
3) If the Programming Code
is valid the door LED will
turn green
EASYBKW
Programming Mode.
Note:
The
Programming Code is 1234. If a
Programming
entered within 30 sec., the
keypad will return to Transmit Mode.
Menu Description
your 4-digit
and the
will be
factory default
Code is not
ENGLISH
in
12
.docx
ISEASYBKW_06_17
Menu
number
1
3
4
6
0
RED
GREEN