PRASTEL EASYBKW Mode D'emploi page 10

EASYBKW
1. INTRODUCTION
The EASYBKW is a vandal resistant programmable keypad reader.
The Wiegand output allows the connection to a large number of
access control devices.
Model EASYBKW is provided with LED backlight.
2. MAIN TECHNICAL FEATURES
Operating Voltage Range:
Maximum Input Current:
With backlight
(EASYBKW only):
Transmission formats:
1 to 5 keys + Facility Code, 26-Bit Wiegand
30-bit Wiegand
clock & data
Operating Temperature:
Umidity operating :
IP protection degree:
Dimensions:
Weight:
3. MOUNTING
Before starting, select the location to mount
the EASYBKW reader. This location should
be at shoulder height. For fixing, drill four
holes, in
correspondenc
e of the four
points marked as B.
Route the interface cable from the Reader to
the Controller. Fix the EASYBKW back cover
to its mounting location and return the front
cover by using the supplied security screw
and the L-Shaped tool provides in the
controllers accessories kit.
ENGLISH
5 – 16 Vcc
20mA in standby (60mA max.)
50mA in standby (90mA max.)
-31°C to 63°C
0 a 95% (Non-Condensing)
IP67
120mm x 76mm x 27mm
485 g
CAUTION! DO NOT DRILL
This is the Tamper Lens
10
ISEASYBKW_06_17
A
B
C
B
A
.docx
B
B