Replacing Sleeve-Cutting Blades - Weidmüller Crimpfix E Notice D'instructions Originale

Troubleshooting

8.5 Replacing sleeve-cutting blades

Risk of injury posed by sharp blades!
► Use forceps to change the blades.
► Dispose of the removed blades in a sepa-
rate container.
► Switch the machine off.
► Open the front flap (figure 3.1, 3).
► Press the transport bolt (1) upwards.
► Remove the wire-end ferrule belt.
► Release the star grip (2).
► Remove the transport unit (3) in an upwards direction.
2
1
Figure 8.3 Transport unit
50
CAUTION
► Use a 2.5 size Allen key to remove both screws (4).
► Remove the isolating blade cover (5).
► Note the installation position of the sleeve-cutting
blade.
► Replace the sleeve-cutting blade (6) with a new one.
4
5
Figure 8.4 Replacing sleeve-cutting blades
► Installation in reverse order.
► Make sure the top edge lies flush when installing the
transport unit.
3
Figure 8.5 Transport unit top edge
6
2516390000/03/07.2018