Emptying Waste Containers; Cleaning Wire-Holding Tongs - Weidmüller Crimpfix E Notice D'instructions Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 55
7.4 Emptying waste containers
Depending on the thickness of the stripped material, the
waste container should be emptied after every 2,000 to
6,000 cycles.
The waste container must also be emptied after each in-
stance of transport or shipping.
► Pull out the waste container and empty it.
Figure 7.2 Waste container
► Re-insert the waste container.
2516390000/03/07.2018
7.5 Cleaning wire-holding tongs
► Clean the wire-holding tongs with a brush.
Figure 7.3 Wire-holding tongs, from front
Additional monthly maintenance:
► Grease the holding tongs at the guide grooves (1) of
the rollers.
Figure 7.4 Guide groove, from the side
Cleaning and maintaining the machine
1
43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

24391400000

Table des Matières