Cleaning The Stranded Wire Fixing Unit; Check The Strippingblade; Cleaning The Interior; Lubricating The Crimping Drum - Weidmüller Crimpfix E Notice D'instructions Originale

Cleaning and maintaining the machine
7.6 Cleaning the stranded wire fixing unit
Figure 7.5 tranded wire fixing
► Clean the fixing contour with a brush
7.7 Check the strippingblade
Figure 7.6 Stripping unit
► Check the blade (1).
► If necessary, replace the blades (see section 8.4).
44

7.8 Cleaning the interior

► Remove the waste container (see section 7.4).
► Clean the inside of the machine with a brush and, if

7.9 Lubricating the crimping drum

1
Figure 7.7 Crimping drum
► Lubricate the support (2) and bearing (3) of the crimp-
necessary, with a vacuum cleaner.
Never use compressed air for cleaning the inside,
because otherwise small parts (e.g. stripping resi-
dues) become inaccessible on the inside of the
machine. This may result in function faults and
operational stoppages.
3
ing drum with Teflon spray.
2
2516390000/03/07.2018