Gigaset 5010 Manuel D'utilisation page 7

Changing the dialling
mode
c?#
Lift handset,
select function.
1 2
/ 1: Tone dialling
2: Pulse dialling
without flash
function (i.e. the
recall key has no
function).
?a
Press Set key and
replace handset.
Changing dialling mode
during a call
If your telephone is set to
pulse dialling and you want to
use functions that require
tone dialling (e.g. remote
access to an answering
machine), you can change the
dialling mode during a call.
*
When connected:
Press asterisk key.
The dialling mode
is changed.
o
Enter digits for
remote control/
data transfer.
After replacing the handset,
the telephone reverts to the
original dialling mode.
Enquiry/forwarding on a
PABX
>
During a call: Press
recall key.
The subsequent procedure
depends on your PABX.
Setting the flash time
(interruption) for the recall
key
By default, the recall key is
preset to a flash time of 90 ms
for use of new features on
public telephone systems.
On a PABX, it may be neces-
sary to change the flash time
(e.g. 600 ms). To do this,
please refer to the operating
instructions for your PABX.
6
EN
c?195
0 4
...
?a
Additional services in
public telephone
systems
Public telephone systems - in
some cases by special order/
request - offer you a range of
additional services (e.g. call
divert, call back on busy,
three-party conference etc.).
These services can be selected
using specified key combina-
tions, which your network
provider will notify you of. You
can save these key combina-
tions to the repertory keys.
Not all additional services
mentioned are available in all
countries.
Recall key (use in public
telephone systems)
In public telephone systems,
this key is required to use cer-
tain additional services.
Note:
The appropriate flash time for
the specific country must be
set before using the recall key;
see "Setting the flash time
(interruption) for the recall
key":
◆
Belgium, Netherlands,
Switzerland: 120 ms.
◆
France, Luxembourg, Por-
tugal, Germany: 270 ms.
◆
Other European countries:
100 ms.
Lift handset,
select function.
Enter desired flash
code:
0: 90 ms (default
setting);
1: 120 ms,
2: 270 ms;
3: 375 ms,
4: 600 ms.
Press Set key and
replace handset.