Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TOOLS NEEDED FOR ASSEMBLY
Supplied
3mm hex key
5mm hex key
6mm hex key
Not Supplied
Slotted screwdriver
Wrench
Adjustable wrenches
Combination square
Rubber malllet or
block of wood
Hammer
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the drill press and all its parts, and
compare against the list below and the illustration on the
next page. Place the drill press on a secure surface and
examine it carefully.
WARNING
!
•
To avoid injury from unexpected starting or electrical
shock, do not plug the power cord into a source of
power during unpacking and assembly. This cord
must remain unplugged whenever you are adjusting/
assembling the drill press.
•
The drill press is heavy and should be lifted with
care. If needed, get the assistance of someone to lift
and move the drill press.
•
If any part is missing or damaged, do not attempt
to assemble the drill press, or plug in the power
cord until the missing or damaged part is correctly
replaced.
TABLE OF LOOSE PARTS
ITEM
DESCRIPTION
A.
Head Assembly
B.
Table
C.
Base
D.
Hardware Bag
Lock Handles
Crank Handle
Arbor
Hex Wrenches
Wedge
Hex Bolts
E.
Feed Handles Assembly
F.
Chuck & Key Hardware
Chuck
Chuck Key
G.
Column Assembly
8
QUANTITY
1
1
1
2
1
1
3
1
4
3
1
1
1
Publicité
Table des Matières
