Continental Fireplaces CB30-1 Manuel D'installation Et D'opération page 27

REAR VENT
For rear vent termination not exceeding 10" (254mm) of horizontal vent run.
REAR EXIT ENCLOSURE
The appliance requires a minimum enclosure height of 41 5/8" (1057mm). For temperature requirements, the
enclosure space around and above the appliance must be left unobstructed.
NOTE: The vent shield is telescopic and must be adjusted to shield the full depth of combustible wall
penetration.
* See "VENTING" section.
rough framing
W415-2754 / B / 12.09.20
EN
27