Main Working Elements Of The Machine; Commands - TECO 40 TOP Manuel D'utilisation

8. MAIN WORKING ELEMENTS OF THE
MACHINE
Learn your machine: knowing exactly how the machine works is the best way
to guarantee safety and machine performance.
Learn the function and layout of all controls.
Carefully check that all controls on the machine are working properly.
To avoid accidents and injury, the machine must be installed properly, operated
correctly and serviced regularly.
1 Turntable
2 Clamp
3 Vertical arm
4 Mounting bar
5 Handle
6 Handle
7 Movable lever-less head for tyre mounting/demounting
8 Filter Regulator + Lubricator Unit (regulates pressure, filters, removes humidity of
and lubricates the compressed air supplied)
9 Bead breaker arm
10 Bead breaker
11 Wheel support
17 Wheel lift (optional)
18 Tyre inflation pedal
19 Pressure gauge
24 Working arm cylinder (Pneumatic version)
25 Demounting tool control cylinder
28 Jack
29 Bead presser arm
30 Bead presser tool
31 Bead presser roller
32 Bead lifter arm
33 Tyre lever
34 Air tank

8.1 COMMANDS

8.1.a. PEDAL
12 Bead breaker control pedal (monostable pedal to operate the bead breaker shoe)
13 Locking wedges opening and closing control pedal (stable three-position pedal
for opening and closing wedges).
14 Turntable rotation control pedal, two-position pedal (three-position only 2V):
• Position 0 (stable) turntable stationary
• Pressed downwards (unstable position), rotate clockwise.
• Lifted (Unstable position) anticlockwise rotation.
94
ATTENTION
User's manual