TECO 40 TOP Manuel D'utilisation page 121

Turntable fails to clamp rims
Faulty turntable cylinder.
➥ Replace the turntable cylinder.
Tips of locking wedges are worn.
➥ Replace the locking wedges.
Control pedals do not return to their position
Pedal return spring broken.
➥ Replace the spring.
Bead breaker cylinder lacks force, fails to break beads and leaks air
EN
Silencer plugged.
➥ Replace the silencer
Cylinder seals worn.
➥ Replace the seals.
➥ Replace the bead breaker cylinder.
After clamping, the tool head does not rise or rises too far
from rim
lamping plate not adjusted.
➥ Adjust the plate. .
Column does not tilt
Column tilting cylinder faulty.
➥ Replace column opening cylinder.
No air supply to cylinder.
➥ Hoses folded.
➥ Replace valve.
Clamping arm cylinders leak air
Faulty piston or gaskets.
➥ Replace pistons and gaskets.
The pole tilts violently or too slowly
Release valve incorrect setting.
➥ Adjust the discharge regulators. Hare: speed increase; Turtle: speed reduction
Tyre pressure gauge needle fails to return to 0
Pressure gauge faulty or damaged.
➥ Replace the pressure gauge.
The lubricator does not work
No oil in lubricator.
➥ Top up lubricator with SAE20 non-detergent oil.
Lubricator broken.
➥ Replace the lubricator
User's manual 121