TECO 40 TOP Manuel D'utilisation page 106

- Lift manually the tyre to create space for bead lifter arm.
1
2
29b
29a
B
A
C
29c
E
D
- Acting on control (Fig. 29b), located on the TPH console, the bead lifter arm
will move forward allowing the tool touching the lower rim edge. The bead lifter arm will
keep a safety distance of 2/3 mm from the rim edge.
- Acting on the control , the bead lifter will push upwards the lower tyre bead.
- Using control , operate the hook engaging the bottom bead of the tyre (C
Fig. 29c).
106 User's manual