Step-by-step installation
STEP 1 Select a site
Select a site that:
• Has a solid, level surface without carpeting or flooring that may obstruct ventilation
• Is away from direct sunlight
• Has adequate room for opening and closing the door
• Is away from any heat sources
• Provides room for maintenance and servicing
• Has a temperature range between 50 °F (10 °C) and 109 °F (43 °C)
CAUTION
• If your refrigerator is equipped with an ice maker, provide extra space at the rear of
the refrigerator for the water line connection.
• When you install the refrigerator next to a fixed wall, you must provide a minimum
clearance of 3
• Use of an electrical outlet with a ground fault interrupter (GFI) is not recommended.
NOTE
To facilitate moving your refrigerator to its final location, be sure to measure the width
and height of doorways, thresholds, ceilings, stairways, and anything else that needs to be
taken into consideration to ensure you can move your refrigerator safely. The following
diagram illustrates the exact height and depth (factory specifications) of your refrigerator.
Clearance
See the pictures and table below for space requirements for installation.
B
A
E
C
Untitled-4 19
/
" (95 mm) from the wall to allow the door to swing open.
3
4
D
Model
Depth "A"
Width "B"
Height "C"
Overall Height "D"
Depth "E"
RF22R*
28
/
" (724 mm)
4
8
35
/
" (908 mm)
3
4
68
/
" (1749 mm)
7
8
70" (1777 mm)
31" (788 mm)
English 19
2019-05-14
11:49:29