STEP 4 Levelling the refrigerator
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Levelling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levellers) on the front legs. Use a flat-head
screwdriver to turn the levellers.
Untitled-4 31
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller on the left side front leg. Turn
the leveller clockwise to raise the left
side or turn it counterclockwise to
lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller on the right side front leg.
Turn the leveller clockwise to raise the
right side or turn it counterclockwise to
lower.
English 31
2019-05-14
11:49:35