System Maintenance And Adjustments - Monument Water Systems Plumbline 3000 Série Guide D'installation / Guide D'utilisation

Easy-to-Read Indicator Icons:
•
Extra Cycle Option:
•
Cycle button for five seconds.
Regeneration Status Display:
•
cycle number followed by the time remaining in that cycle.
Regeneration Override:
•
advance to the next cycle step immediately by pressing the Extra Cycle button.

System Maintenance and Adjustments

Adding Salt:
Maintain salt in your system at all times to ensure your softener can
properly soften your water. Only use a quality grade of salt processed especially for
use in water softeners. Ensure that the salt level in the brine tank is always above the
water level. If your system ever runs out of salt, refill it, wait 30 minutes and then
follow the procedures in the Extra Cycle / Manual Regeneration section of this manual.
NEVER USE ROCK SALT in your Plumbline system; the dirt and rocks inherent in rock
salt will damage your system.
By-passing Your System:
by-pass your system should you ever wish to take it offline while you use water for
other purposes (e.g., filling a swimming pool, watering your grass, etc.). To by-pass
your system, turn both handles until they are perpendicular to the system inlet/
outlet. To place your system back online, turn both handles until they are parallel with
the system inlet/outlet.
Online
Alert you to system status at a glance.
Triggers a regeneration immediately by pressing the Extra
During a regeneration, the display will show the
During regeneration, you can force the system to
Plumbline's integrated by-pass valve allows you to
By-pass
6