Mode Button - Monument Water Systems Plumbline 3000 Série Guide D'installation / Guide D'utilisation

System Setup (continued)
(Step #10 continued)

Mode Button

Model
Resin Volume
NOTE: The resin volume setting will only be displayed at first power-up or
when the user manually advances the Mode button to Resin.
NOTE: Press the Mode button to cycle through programming options. The
display indicator will point to each mode as you navigate through the settings.
11
Set time of day.
• Set time of day by holding the Up or Down arrow.
• Hold the Extra Cycle button until the Program icon disappears
to save the current time.
12
Set regeneration detail.
• Press the Mode button to advance to Time of Regen Push the Up
or Down arrow to select the time of day you would like your system
to regenerate (typically late at night when no one is using water).
• Press the Mode button again to advance to Salt Amount. Press the
Up or Down arrow to select your salt dosage using the chart on the
next page. Salt dosages range between 3 and 18 lbs. per cubic foot
of resin.
Time of
Day
Time of
Regen
Salt
Amount
MODE
Up Arrow
PS3000M
0.75 cu. ft.
PM
Down Arrow
PS3500M PS3700M
1.1 cu. ft. 1.5 cu. ft.
Hardness
Capacity
Remaining
Resin
Extra Cycle Button
PS3900M
2.5 cu. ft.
16