Wilo Stratos Notice De Montage Et De Mise En Service page 30

English
Double pump mode: Menu order during normal use:
After switching on the module, all symbols
seconds. The current setting
display the same menu order
MA menu appears and remains on the screen permanently.
LC display
26
then sets itself. When "scrolling" in the MA
...
Setting
SL appears on this display by
other (right-hand) pump becomes the master if SL
is confirmed by
been exchanged. Programming can now only be
performed on the right-hand (MA) pump.
Settings cannot be made at the SL. Master and slave
can only be exchanged at the master.
Setting
Peak load and duty / standby mode
The current setting is displayed:
Subject to technical alterations!
appear on the display for 2
appears as for the single pump. Then the
. Master and slave have now
peak-load operation,
or
main/standby operation
The other setting blinks.
Setting stored.
Display returns to basic setting
on MA. The
.
WILO SE 03/2016