Wilo Stratos Notice De Montage Et De Mise En Service page 33

LC display
If no setting is made in the subsequent menu within 30 s, then the display will once
again show the basic setting
Installation and operating instructions Wilo-Stratos/-D/-Z
Setting
After another 5 s, the display switches to
the menu level 3
The HV display appears (works setting).
Rotating the control button will switch
the setting to the cooling/air-condition-
ing (AC) operating mode.
The setting is stored.
The next menu is displayed.
The display "m ft" appears, for which the
unit that is set will be flashing. (Works
setting [ft]).
Rotating the control button will change
the setting to [m]. The new setting will
begin flashing.
The new setting is saved by briefly press-
ing the button.
Display returns to basic setting
.
English
.
29